2013 Dodge Charger Owner Manual SRT - Page 470

468 WHAT TO DO IN EMERGENCIES TIREFIT Usage Precautions • Replace the TIREFIT Sealant Bottle (1) and Sealant Hose (6) prior to the expiration date (printed on the bottle label) to assure optimum operation of the system. Refer to "Sealing a Tire with TIREFIT" section (F) "Sealant Bottle and Hose Replacement". • The Sealant Bottle (1) and Sealant Hose (6) are a one tire application use. After each use, always replace these components immediately at an authorized dealer. • You can use the TIREFIT air pump to inflate bicycle tires. The kit also comes with two needles, located in the Accessory Storage Compartment (on the bottom of the air pump) for inflating sport balls, rafts, or similar inflatable items. However, use only the Air Pump Hose (7) and make sure the Mode Select Knob (5) is in the Air Mode when inflating such items to avoid injecting sealant into them. The TIREFIT Sealant is only intended to seal punctures less than ¼ in (6 mm) diameter in the tread of your vehicle. • When the TIREFIT sealant is in a liquid form, clean • Do not lift or carry the TIREFIT kit by the hoses. water, and a damp cloth will remove the material from the vehicle or tire and wheel components. Once the WARNING! sealant dries, it can easily be peeled off and properly • Do not attempt to seal a tire on the side of the discarded. vehicle closest to traffic. Pull far enough off the • For optimum performance, make sure the valve stem road to avoid the danger of being hit when using on the wheel is free of debris before connecting the the TIREFIT kit. TIREFIT kit. (Continued)