2014 Dodge Avenger Owner Manual - Page 399

WHAT TO DO IN EMERGENCIES 397 NOTE: There are steps that you can take to slow down Engine Oil Overheating (2.4L Engine Only) - If an impending overheat condition: Equipped • If your air conditioner (A/C) is on, turn it off. The A/C During sustained high-speed driving or trailer tow up system adds heat to the engine cooling system and long grades on a hot day, the engine oil temperature may become too hot. If this happens, the "HOTOIL" message turning the A/C off can help remove this heat. flashes in the odometer and the vehicle speed will be • You can also turn the temperature control to maximum reduced to 53 mph (85 km/h) until the engine oil heat, the mode control to floor and the blower control to temperature is reduced. high. This allows the heater core to act as a supplement to the radiator and aids in removing heat from the engine NOTE: The vehicle speed is reduced to a maximum of cooling system. 53 mph (85 km/h). You may of course, reduce your vehicle speed further if needed. WARNING! You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiator or coolant bottle is hot. 6 WHEEL AND TIRE TORQUE SPECIFICATIONS Proper lug nut/bolt torque is very important to ensure that the wheel is properly mounted to the vehicle. Any time a wheel has been removed and reinstalled on the vehicle the lug nuts/bolts should be torqued using a properly calibrated torque wrench.