2014 Dodge Avenger Owner Manual - Page 442

440 MAINTAINING YOUR VEHICLE attention should also be given to hood latching compo- Avoid using the wiper blades to remove frost or ice from nents to ensure proper function. When performing other the windshield. Keep the blade rubber out of contact with underhood services, the hood latch, release mechanism petroleum products such as engine oil, gasoline, etc. and safety catch should be cleaned and lubricated. NOTE: Life expectancy of wiper blades varies depending The external lock cylinders should be lubricated twice a on geographical area and frequency of use. Poor perforyear, preferably in the Fall and Spring. Apply a small mance of blades may be present with chattering, marks, amount of a high quality lubricant, such as MOPAR® water lines or wet spots. If any of these conditions are Lock Cylinder Lubricant directly into the lock cylinder. present, clean the wiper blades or replace as necessary. Windshield Wiper Blades Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild nonabrasive cleaner. This will remove accumulations of salt or road film. Adding Washer Fluid The windshield washer and the rear window washer share the same fluid reservoir. The fluid reservoir is located in the engine compartment. Be sure to check the fluid level in the reservoir at regular intervals. Fill the reservoir with windshield washer solvent (not radiator Operation of the wipers on dry glass for long periods antifreeze) and operate the system for a few seconds to may cause deterioration of the wiper blades. Always use flush out the residual water. washer fluid when using the wipers to remove salt or dirt from a dry windshield.