1996 Ford Probe Owner Guide 1st Printing - Page 226

4. Replace the radiator breather cap and the coolant system cap and tighten to the first stop. Start and idle the engine until the radiator upper hose is warm. The warm hose indicates the thermostat is open and the engine coolant is flowing through the entire system. Shut the engine off and check the fluid level in the radiator through the coolant system cap opening. Add more fluid if necessary. When the radiator is filled to the proper level, replace the coolant system cap and tighten both caps completely. 5. 6. 7. Checking hoses Check all engine and heater system hoses and hose connections for deterioration, leaks, and loose hose clamps as specified in the maintenance schedule. Repair or replace with Motorcraft hoses or equivalent as necessary. Windshield Washer Fluid and Wipers Washer Fluid Check the level of the windshield washer fluid every time you stop for fuel. The reservoir for the windshield washer fluid is located in the engine compartment. Visual inspection can determine if the washer fluid is adequate. Do not operate the washer when the reservoir is empty. 229