1997 Ford Probe Owner Guide 1st Printing - Page 179

Preparing Your Vehicle 1. Your vehicle has a 12-volt starting system, so you need to use a 12-volt jumper system. You will damage your starting motor, ignition system, and other electrical parts if you connect them to a 24-volt power supply (either two 12-volt batteries in series or a 24-volt generator set). Do not disconnect the battery of the disabled vehicle. You could damage the vehicle's electrical system. Park the booster vehicle close to the hood of the disabled vehicle. Make sure the vehicles do not touch each other. Set the parking brake on both vehicles and stay clear of the engine cooling fan and other moving parts. Check all battery terminals and remove any excessive corrosion before you attach the jumper cables. Connect one end of the first jumper cable to the positive (+) terminal of the discharged battery. (You can connect either jumper cable to the positive (+) terminal, as long as you use the same cable for both positive terminals.) Most jumper cables have a red cable and a black cable. The red cable is generally used for the positive terminals and the black for the negative ones. Connect the other end of the first cable to the positive (+) terminal of the booster battery. Connect one end of the second cable to the negative (ȕ) terminal of the booster battery - NOT to the discharged battery. 2. 3. 4. Connecting the jumper cables 1. 2. 3. 176