1997 Ford Windstar Owner Guide 1st Printing - Page 102

Controls and Features START cranks the engine. Release the key once the engine starts so that you don't damage the starter. The key should return to the ON position when you release it. The START position also allows you to test the brake warning light. Removing the Key From the Ignition LOCK is the only position that allows you to remove the key from the ignition. The LOCK feature helps to protect your vehicle from theft, because it also locks the steering wheel and the gearshift lever when the key is removed. If your key is stuck in the LOCK position, and you are unable to turn it, move your steering wheel left or right until the key turns freely. To remove your key from the ignition: 1. Put the gearshift lever in P (Park). 2. Set the parking brake fully. 3. Turn the ignition key to LOCK. 4. Remove the key. R WARNING When you leave your vehicle, place the gearshift lever in P (Park). Set the parking brake fully, and shut off the engine. Never park your vehicle in N (Neutral). If you do not take these precautions, your vehicle may move suddenly and injure someone. R WARNING Do not leave children, unreliable adults, or pets unattended in your vehicle. 101