1997 Ford Windstar Owner Guide 1st Printing - Page 138

Controls and Features Do not push the keypad buttons with a key, ball-point pen, pencil, or any other hard object since they could damage the buttons. Using the Keyless Entry System To operate the Keyless Entry System, you must be familiar with the "personal code" and the "permanent code." The personal code is a code number that you select that is easy for you to remember. This is the number that you enter on the keypad to unlock the door. The personal code can be changed as often as you like. The permanent code is a number that is assigned to your vehicle and can be used to program your personal code into the system. For your convenience, one additional piece of tape with the permanent code has been included in the glove box. Place this additional piece of tape in a safe location where you can refer to it when necessary. Do not put it in any location that is accessible to unauthorized persons, since this would allow them entrance to your vehicle. Programming your Personal Code A personal code does not replace the permanent code that the dealership gave you. The original dealer code will always work in addition to your personal code. To program your own code: 1. Select five digits for your personal code. 2. Enter the permanent code. 3. Within five seconds, press the 1/2 button. 4. Within five seconds of pressing the 1/2 button, enter your personal code. Press each digit within five seconds of the previous digit. 137