2000 Ford Focus Owner's Manual - Page 187

Maintenance and care • If the oil level is between the MIN and MAX marks (2.0 SPI engine) or between ADD and FULL (2.0 Zetec engine), the oil level is acceptable. DO NOT ADD OIL. • If the oil level is below the MIN mark, add enough oil to raise the level within the MIN-MAX range. • Oil levels above the MAX mark may cause engine damage. Some oil must be removed from the engine by a service technician. 7. Put the indicator back in and ensure it is fully seated. Adding engine oil 1. Check the engine oil. For instructions, refer to Checking the engine oil in this chapter. 2. If the engine oil level is not within the MIN and MAX ranges, add only certified engine oil of the recommended viscosity. Remove the engine oil filler cap and use a funnel to pour the engine oil into the opening. 3. Recheck the oil level. Make sure the oil level is not above the MAX mark (2.0 SPI engine) or the FULL mark (2.0 Zetec engine) on the dipstick. 4. Replace oil filler cap and ensure it is fully tightened. 2.0 SPI engine 2.0 Zetec engine 187