2011 Ford Flex Owner Guide 2nd Printing - Page 24
2011 Ford Flex Manual
Page 24 highlights
Instrument Cluster BRAKE FLUID LEVEL LOW - Indicates the brake fluid level is low and the brake system should be inspected immediately. Refer to Brake fluid in the Maintenance and Specifications chapter. AWD OFF (if equipped) - Displayed when the AWD system has been automatically disabled to protect itself. This is caused by operating the vehicle with the compact spare tire installed or if the system is overheating. The AWD system will resume normal function and clear this message after driving a short distance with the road tire re-installed or after the system is allowed to cool. CHECK AWD (if equipped) - Displayed when a problem exists with the AWD system. Contact your authorized dealer as soon as possible. LOW TIRE PRESSURE - Displayed when one or more tires on your vehicle has low tire pressure. Refer to Inflating your tires in the Tires, Wheels and Loading chapter. TIRE PRESSURE MONITOR FAULT - Displayed when the Tire Pressure Monitoring System is malfunctioning. If the warning stays on or continues to come on, contact your authorized dealer as soon as possible. TIRE PRESSURE SENSOR FAULT - Displayed when a tire pressure sensor is malfunctioning, or your spare tire is in use. For more information on how the system operates under these conditions, refer to Tire Pressure Monitoring System (TPMS) in the Tires, Wheels and Loading chapter. If the warning stays on or continues to come on, contact your authorized dealer as soon as possible. POWER STEERING ASSIST FAULT - The power steering system has disabled power steering assist due to a system error; service is required. SERVICE POWER STEERING - The power steering system has detected a condition that requires service. SERVICE POWER STEERING NOW - The power steering system has detected a condition that requires service immediately. ENGINE OIL CHANGE SOON - Displayed when the engine oil life remaining is 5% to 1%. OIL CHANGE REQUIRED - Displayed when the oil life left reaches 0%. INTKEY COULD NOT PROGRAM - Displayed when an attempt is made to program a fifth integrated key to the remote key entry system. For more information on integrated key, refer to the Locks and Security chapter in this manual. 24 2011 Flex (471) Owners Guide, 2nd Printing USA (fus)