2011 Ford Flex Owner Guide 2nd Printing - Page 87

Lights Examples of acceptable condensation are: • Presence of thin mist (no streaks, drip marks or droplets) • Fine mist covers less than 50% of the lens Examples of unacceptable moisture (usually caused by a lamp water leak) are: • Water puddle inside the lamp • Large water droplets, drip marks or streaks present on the interior of the lens Take your vehicle to a dealer for service if any of the above conditions of unacceptable moisture are present. Using the right bulbs Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked with an authorized "D.O.T." for North America and an "E" for Europe to ensure lamp performance, light brightness and pattern and safe visibility. The correct bulbs will not damage the lamp assembly or void the lamp assembly warranty and will provide quality bulb burn time. Function Front park/turn lamp *Front sidemarker lamp Headlamp Number of bulbs 2 N/A 2 2 2 Tail/brake/turn signal lamp Supplemental taillamp Rear sidemarker Backup lamp License plate lamp *High-mount brake lamp Fog lamp N/A 2 2 N/A 2 2 N/A 2 Trade number 3157NA LED 9008 H13 D3 HID (optional) 3157K *LED (optional) 194 194 *LED (optional) 921 C5WL LED H11 87 2011 Flex (471) Owners Guide, 2nd Printing USA (fus)