2015 Ford Fusion Energi Owner Manual Printing 1 - Page 256

Maintenance 2. Go to the front of the vehicle and locate the secondary release lever, which is located under the front of the hood, to your right of the center of the vehicle (driver's side), near the headlight. 3. Release the hood latch by pushing the yellow secondary release lever to your left, toward the center of the vehicle. 5. To close the hood, lift the hood slightly and separate the prop rod from the hood and secure the prop rod in the clip. 6. Lower the hood and allow it to drop the last 10-12 inches (25 to 30 centimeters). Note: Make sure that you close the hood properly and that it fully latches on both sides of the hood. UNDER HOOD OVERVIEW WARNING The inverter system controller contains various high-voltage components that can cause serious bodily harm or death. The inverter system controller is not serviceable and should never be touched, probed, or tampered with. E169261 4. Raise the hood and support it with the prop rod by securing the prop rod in the proper hole in the hood. Note: Do not attempt to service any of the high-voltage components or wiring. For easier identification, the high-voltage wiring insulation is color coated orange. 253 Fusion/Mondeo (CC7), enUSA