2015 Ford Fusion Energi Owner Manual Printing 1 - Page 270

Maintenance Replacing the High Beam Headlamp Bulb 1. 2. 3. 4. Remove the headlamp assembly. Remove the service cap. Disconnect the electrical connector. Turn the bulb counterclockwise and remove it from the headlamp assembly. 5. Install the new bulb in reverse order. Replacing the Low Beam Headlamp Bulb 1. 2. 3. 4. Remove the headlamp assembly. Remove the service cap. Disconnect the electrical connector. Release the retainer spring and remove it from the headlamp assembly. 5. Install the new bulb in reverse order. Replacing the Front Parking/Turn Signal Lamp Bulb 1. Remove the headlamp assembly. 2. Turn the bulb assembly counterclockwise and remove it from the headlamp assembly. 3. Separate the bulb from the bulb socket. 4. Install the new bulb in reverse order. Replacing the Side Marker Lamp Bulb 1. Remove the headlamp assembly. 2. Remove the service cap. 3. Depress the tabs on the socket and remove the socket and bulb together. 4. Separate the bulb from the bulb socket. 5. Install the new bulb in reverse order. Replacing the Tail, Brake, HighMount Brake Lamp, and Turn Signal Lamp Bulbs These lamps are designed with LED light sources. For replacement, see your authorized dealer. Replacing a Reverse Lamp Bulb 1. Make sure the lighting control is in the off position. 2. Open the trunk deck lid. E145777 3. Remove the push pins and reposition the inner body side trim. E145778 4. Remove the three lamp assembly nuts. 5. Gently pull the lamp assembly away from the vehicle. 267 Fusion/Mondeo (CC7), enUSA