2003 Honda CR-V Owner's Manual - Page 114

Power Windows Auto Reverse If the driver's window runs into any obstacle while it is closing automatically, it will reverse direction, and then stop. To close the window, remove the obstacle, then use the window switch again. Auto reverse stops sensing when the window is almost closed. You should always check that all passengers and objects are away from the window before closing it. Any impact due to road conditions may cause the auto reverse function work unexpectedly on the closing window. If it happens frequently, there is a problem with your power window system. You should have your vehicle inspected by your dealer. You can still close the window by pulling back on the window switch lightly and hold it. If your vehicle's battery is disconnected or goes dead, or the driver's window fuse is removed, the AUTO function will be disabled. The power window system needs to be reset after reconnecting the battery or installing the fuse. You should do the following. 1. Start the engine. Push down on the driver's window switch until the window is fully open. 2. Pull back on the driver's window switch to close the window completely, then hold the switch for a second or two more. If the power windows do not operate properly after resetting, have your vehicle checked by a Honda dealer. 112 Instruments and Controls