2003 Honda CR-V Owner's Manual - Page 288
2003 Honda CR-V Manual
Page 288 highlights
Lights 4. Unclip the end of the hold-down wire from its slot. Pivot it out of the way and remove the bulb. 5. Insert the new bulb into the hole, making sure the tabs are in their slots. Pivot the hold-down wire back in place and clip the end into the slot. 6. Install the rubber seal over the back of the headlight assembly. Make sure it is right side up; it is marked ''TOP.'' 7. Push the electrical connector onto the new bulb. Make sure it is connected securely. Turn on the headlights to test the new bulb. 1. Open the hood. The front side marker/turn signal light is next to the headlight bulb. 2. Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise. Replacing a Front Side Marker/ Turn Signal Light Bulb 3. Pull the burned out bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 4. Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place. BULB 5. Test the lights to make sure the new bulb is working. 288 Maintenance