2003 Honda CR-V Owner's Manual - Page 267
2003 Honda CR-V Manual
Page 267 highlights
Spark Plugs The spark plugs in your vehicle are a special iridium-tipped design for longer life. The spark plugs should be replaced according to the distance recommendation in the maintenance schedule. Replacement NUTS NUTS IGNITION COIL LOCK TAB BOLT CONNECTOR 2. Clean off any dirt and oil that have collected around the ignition coils. 3. Use a wrench to remove the bolt holding the ignition coil. Pull the ignition coil up slightly. 1. Remove the four nuts with a wrench, then remove the coil cover. 4. Disconnect the wire connector from the ignition coil by pushing on the lock tab and pulling on the connector. Pull on the plastic connector, not the wires. 5. Remove the ignition coil. 6. Remove the spark plug with a five-eighths inch (16 mm) spark plug socket. 7. Put the new spark plug into the socket, then screw it into the hole. Screw it in by hand so you do not crossthread it. CONTINUED Maintenance 267