2003 Honda CR-V Owner's Manual - Page 153

Audio System The tape direction indicator will light to show you which side of the cassette is playing. The indicates the side you inserted facing upward is now playing. If you want to play the other side, press the PROG button. Dolby noise reduction turns on when you insert a cassette. The indicator will light in the display. If the tape was not recorded with Dolby noise reduction, turn it off by pressing the button. Noise reduction remains off until you turn it on by pressing the button again. When the system reaches the end of the tape, it will automatically reverse direction and play the other side. If you want to remove the cassette from the drive, press the EJECT button. You can remove the cassette with the ignition switch in any position, even if the audio system is turned off. If you turn the system off while a tape is playing, either with the PWR/ VOL knob or by turning off the ignition, the cassette will remain in the drive. When you turn the system back on, the tape will begin playing where it left off. To switch to the radio or CD player while a tape is playing, press the AM, FM or CD button. To change back to the cassette player, push the TAPE button. Tape Search Functions With a cassette playing, you can use the FF, REW, SKIP, or REPEAT function to find a desired program. Fast Forward and ReFF/REW wind move the tape rapidly. To rewind the tape, push the REW button. You will see REW in the display. To fast forward the tape, push the FF button. You will see FF displayed. Press the PLAY button to take the system out of rewind or fast forward. If the system reaches the end of the tape while in fast forward or rewind, it automatically stops that function, reverses direction, and begins to play. 152 Comfort and Convenience Features