2004 Honda CR-V Owner's Manual - Page 120

Playing a Tape To Play a Tape The ignition switch must be in ACCESSORY (I) or ON (II). Make sure the open side of the tape is facing right, then insert the tape most of the way into the slot. The system will pull the tape in the rest of the way, and begin to play it. The tape direction indicator will light to show you which side of the tape is playing. The indicates the side you inserted upward in now playing. If you want to play the other side, press the PROG button. When the player reaches the end of the tape, it will automatically reverse direction and play the other side. Dolby noise reduction turns on when you insert a tape. The indicator will light in the display. If the tape was not recorded in Dolby, turn it off by pressing the NR button. Dolby remains off until you press the NR button again. Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. ''DOLBY'' and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. To switch to the radio or CD player while a Tape is playing, press the AM, FM or CD button. To change back to the tape player, press the TAPE button. Tape Search Functions FF/REW To rewind the tape, push the REW button. You will see REW in the display. To fast forward the tape, push the FF button. You will see FF displayed. Press the FF, REW, or PLAY button to take the system out of rewind or fast forward. SKIP Press button to find the beginning of the current song or passage. Press button to find the beginning of the next song or passage. When the system reaches the beginning of a song or passage, it begins to play it. To Stop Playing a Tape To remove the tape, press the EJECT button. If you want to turn the player off, press the PWR/VOL knob or turn off the ignition. The tape will remain in the drive. When you turn the system back on, the tape will begin playing where it left off. CONTINUED Comfort and Convenience Features 115