2004 Honda CR-V Owner's Manual - Page 63

Instrument Panel ''Daytime Running Lights'' Indicator Turn Signal and Hazard Warning Indicators The left or right turn signal indicator blinks when you signal a lane change or turn. If the indicator does not blink or blinks rapidly, it usually means one of the turn signal bulbs is burned out (see page 184 ). Replace the bulb as soon as possible, since other drivers cannot see that you are signaling. When you turn on the Hazard Warning switch, both turn signal indicators blink. All turn signals on the outside of the vehicle should flash. Canadian models only High Beam Indicator This comes on with the high beam headlights. See page 65 for information on the headlight controls. On Canadian models, this indicator comes on with reduced brightness when the Daytime Running Lights (DRL) are on (see page 65 ). Low Fuel Indicator This comes on as a reminder that you must refuel soon. This indicator comes on when you turn the ignition switch to ON (II) with the headlight switch off and the parking brake set. It should go off if you turn on the headlights or release the parking brake. If it comes on at any other time, it means there is a problem with the DRL. There may also be a problem with the high beam headlights. Cruise Control Indicator This comes on when you set the cruise control. See page 119 for information on operating the cruise control. 58 Instruments and Controls