2009 Hummer H3T Owner's Manual - Page 163

Instrument Panel contact XM at.xmradio.com or call 1-800-929-2100 in the U.S. and xmradio.ca or call 1-877-438-9677 in Canada. (Information) (XM Satellite Radio Service): Press to display additional information current XM station when 4 is shown on the display. When the complete message has shown, 4 disappears from the display. The last message can be viewed until a new message is received or the station is changed. Selecting an FM/AM/XM Station BAND: Press to select FM1, FM2, AM, XM1, or XM2. Manual Tuning (Tune): Turn to select a radio station. Automatic Tuning 1-6 (Preset Pushbuttons): Press to select preset stations. 3-45 2. Press t or u again or one of the pushbuttons to stop scanning presets. To scan preset stations: 1. Press and hold t or u for more than four seconds. PSC or PSCN displays and the radio beeps twice. The radio goes to a preset station, plays for a few seconds, then goes to the next preset station. 2. Press t or u again or one of the pushbuttons to stop scanning presets. Programming Preset Stations Up to 30 stations (six FM1, six FM2, and six AM, six XM1 and six XM2), and equalization settings for each station can be programmed on the six numbered pushbuttons. To program presets: 1. Turn the radio on. 2. Press BAND to select FM1, FM2, AM, or XM1 or XM2. 4 e • Parts of the message appear every three seconds if the entire message cannot be shown on the display at once. t SEEK u: Press and release to go to the previous or next station and stay there. The radio only stops at stations with a strong signal. Press and hold to scan stations or preset stations. To scan stations: 1. Press and hold t or u for more than two seconds. SCN or SCAN displays and the radio beeps once. The radio goes to a station, plays for a few seconds, then goes to the next station. • Press and release 4 to manually scroll through the message. • When 4 is pressed and a message is not available from the station, NO INFO is shown on the display.