2009 Hummer H3T Owner's Manual - Page 304

5-68 Service and Appearance Care 4. Undo the straps that secure the jack tool bag to the jack. 5. Open the tool bag to find the following tools, which are used to remove the spare tire and flat tire: The spare tire is attached to the outside of the swing-gate. To remove the spare tire: Removing the Spare Tire and Tools (H3) The equipment needed is located in the swing-gate, behind a cover. To remove the equipment: 1. Open the swing-gate. See Swing-gate on page 2-9. 2. Remove the cover, located on the inside of the swing-gate, by lifting the two latches. 3. Turn the wing nut counterclockwise to release the jack tool bag and jack and remove them. A. B. C. D. E. Wheel Wrench Jack Handle Extensions Jack Handle Jack Wheel Blocks 1. If the vehicle has a spare tire cover release the latch by pulling the latch straight back and turning it away from the cover at the same time. Notice: Opening the endgate before completely closing and latching the spare tire cover may result in damage to your vehicle. Close and latch the spare tire cover before opening the endgate to avoid possible damage.