2009 Hummer H3T Owner's Manual - Page 305

Service and Appearance Care 5-69 Removing the Spare Tire and Tools (H3T) To access the jack and tools located under the rear seat: Remove the center cap, if equipped, by placing the flat end of the wheel wrench in the slot on the wheel and gently pry the center cap out. 2. Use the wheel wrench to remove the wheel nuts securing the spare tire. If the vehicle has locking lug nuts, the key is supplied in the tool bag. Use the key along with the wheel wrench to remove the wheel nuts from the tire. 3. You may need assistance to remove the spare tire. Pull off and gently lower the spare tire to the ground. Set it next to the flat tire. 1. Turn the wing nut (A) counterclockwise to release the jack and tools. 2. Remove the jack and tool kit from the bracket. 3. Release the straps (B) that secure the tool bag to the jack.