2009 Hummer H3T Owner's Manual - Page 315

Service and Appearance Care To store the jack tool bag and jack: 1. Return the tools to the jack tool bag. 5-79 4. Use the wheel wrench to tighten the nuts firmly. Try to move the tire back and forth slightly to be sure it is secure. 5. Reinstall the center tire cover onto the spare or flat tire. 6. If the vehicle has a spare tire cover close the cover and latch the side latch. 2. Secure the tool bag to the jack by securely wrapping the straps around the jack. Then, slide the straps through the rings on the bag and secure. 3. Position the jack and jack tool bag in the swing-gate. When reinstalling the jack and jack tool bag, make sure the jack base is securely seated behind the tabs in the swing-gate. 4. Reinstall the wing nut retainer to fasten the jack and tool bag in the storage compartment. Make sure that the wing nut passes through the tool bag and the jack before tightening it. 5. Turn the wing nut retainer clockwise to secure. 6. Reinstall the compartment cover by inserting the locator tabs in the holes in the swing-gate. Push the latches down to secure.