2004 Jeep Liberty Owner's Manual - Page 151

UNDERSTANDING YOUR INSTRUMENT PANEL 151 INSTRUMENT CLUSTER DESCRIPTION 1. Tachometer Indicates the permissible engine revolutions-per-minute for each gear range. Before reaching the red area, ease up on the accelerator to prevent engine damage. 2. Turn Signal Indicator Light The arrows will flash in unison with the exterior turn signals, when using the multi-function control lever. A chime will sound if the turn signals are left on continuously for 2 miles (3 km) until they are deactivated. 3. High Beam Indicator Light This light shows that the headlights are on high beam. Pull the multi-function control lever towards the steering wheel to switch the headlights from high to low beam. 4. Speedometer Indicates vehicle speed. 5. Tire Pressure Monitor Warning Light - If Equipped This light will turn on when there is a low tire pressure condition. The light will also turn on if a problem exist with any tire sensor. The light will remain on until the tire pressure is properly set or the problem with the sensor is corrected. This light will turn on momentarily as a bulb check when the engine is started. When the "Tire Pressure Monitor Warning Light" is lit, one or more of your tires is significantly under-inflated. You should stop and check your tires as soon as possible, and inflate them to the proper pressure as indicated on the vehicle's tire information placard. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect 4