2004 Jeep Liberty Owner's Manual - Page 25
2004 Jeep Liberty Manual
Page 25 highlights
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 NOTE: The transmitter can be programmed to unlatch the flip-up window immediately upon activation of the "Rear Release" button (without pressing and holding) (within 23-50 feet (7-15 meters) of the vehicle) by performing the following procedure: 1. Press and hold the "Unlock" button on the transmitter. 2. Continue to hold the "Unlock" button, wait at least 4 but no longer than 10 seconds, then press the "Rear Release" button. 3. Release both buttons. 4. Repeating steps 1-3 will restore original transmitter operation. NOTE: Unlatching the flip-up window will unlock the swing gate. After closing the flip-up window, press the "Lock" button on the transmitter to lock the swing gate. Panic Alarm The panic mode flashes the park lights, and sounds the horn for about 3 minutes or until the alarm is turned off. To Use the Panic Alarm Press and hold the PANIC button for at least 1 second to activate the panic alarm. Press and hold the PANIC button a second time to deactivate the alarm. The alarm will also shut itself off after starting the vehicle and accelerating to 15 mph (24 km/h). NOTE: The "Panic" and "Security" alarms are quite different. Please take a moment to activate the "Panic" and the "Security" modes to hear the differences in the horn. In case one should go off in the future, you will need to know which mode has been activated in order to deactivate it. 2