2007 Jeep Commander Owner Manual - Page 25

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 3. To reassemble the transmitter case, join the two halves of the case together. Install and tighten the screw until snug. Make sure there is an even "gap" between the two halves. Test transmitter operation. REMOTE STARTING SYSTEM - IF EQUIPPED Your vehicle may be equipped with a remote starting system, which will allow the vehicle to be started up to 300 feet (91 meters) away from the vehicle using the remote keyless entry key fob which is part of your ignition key. In order to remote start your vehicle, the hood, liftgate, and all of the doors must be closed. To remote start your vehicle, press the "Lock" button on the key fob once, then within three seconds press the "Remote Start" button twice. To indicate that the vehicle is about to start, the parking lights will flash and the horn will sound briefly. Remote Start Button 2 Once the vehicle has started, the engine will run for 15 minutes. To cancel remote start, press the "Remote Start" button twice within two seconds. To enter the vehicle while the engine is running during a remote start, you must first unlock the vehicle using the "Unlock" button on the key fob. After the vehicle is