2007 Jeep Commander Owner Manual - Page 334

334 STARTING AND OPERATING Shifting Into Neutral (N) Use the following procedure to prepare your vehicle for recreational towing. 1. Depress brake pedal. 2. Turn the ignition key ON, engine off. 3. Shift transmission into N (Neutral). CAUTION! It is necessary to follow these steps to be certain that the transfer case is fully in N (Neutral) before recreational towing to prevent damage to internal parts. 4. Shift transfer case into N (Neutral). Hold down N (Neutral) "pin" switch (with a pen, etc.) for 4 seconds until the LED lamp by the switch starts to blink indicating shift in progress. Lamp will stop blinking (stay on solid) when Neutral shift is complete. A "4WD SYSTEM IN NEUTRAL" message will display on the EVIC (Electronic Vehicle Information Center). Refer to "Electronic Vehicle Information Center (EVIC)" in Section 4 of this manual. (See page 184 for more information.)