2009 Jeep Grand Cherokee Owner's Manual - Page 139

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 High Beam Switch Push the multifunction lever away from you to switch the headlights to high beam. Pull the multifunction lever towards you to switch the headlights back to low beam. Flash-to-Pass You can signal another vehicle by lightly pulling the multifunction lever toward the steering wheel. This will cause the high beam headlights to turn on, and remain on until the lever is released. Headlight Time Delay This feature delays turning off the headlights for 30, 60, or 90 seconds after the ignition switch is turned OFF. To activate the headlight delay, the multifunction lever must be rotated to the "Off" position after the ignition switch is turned to LOCK/ACC. Only the headlights will illuminate during this time. Refer to "Electronic Vehicle Information Center (EVIC) - Customer-Programmable Features" in Section 4 to turn this feature "On/Off" or set the time interval. 3 High Beam/Low Beam Select Interior Lights The interior lighting consists of courtesy lights (below the instrument panel), an overhead console light (which