2009 Jeep Grand Cherokee Owner's Manual - Page 146

144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the top of the switch to move the pedals rearward (toward the driver). • The pedals can be adjusted with the ignition OFF. • The pedals can be adjusted while driving. • The pedals cannot be adjusted when the vehicle is in REVERSE (R) or when the Electronic Speed Control is ON. A message will be displayed in the Electronic Vehicle Information Center (EVIC) if the pedals are attempted to be adjusted when the system is locked out ("Adjustable Pedal Disabled - Cruise Control Engaged" or "Adjustable Pedal Disabled - Vehicle In Reverse"). Refer to Electronic Vehicle Information Center (EVIC) in Section 4 for more information. CAUTION! Do not place any article under the adjustable pedal's or impede its ability to move as it may cause damage to the pedal controls. Pedal travel may become limited if movement is stopped by an obstruction in the adjustable pedal's path. ELECTRONIC SPEED CONTROL - IF EQUIPPED When engaged, Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h) for 3.7L, 4.7L, and 5.7L engines; and 14 mph (23 km/h) for 3.0L diesel engines. The Electronic Speed Control lever is located on the right side of the steering wheel.