2009 Jeep Liberty Owner's Manual - Page 334

332 STARTING AND OPERATING The "Hill Descent" button is located in the lower switch bank below the climate control. 2. Press the "Hill Descent" button. The "Hill Descent Control Indicator Light" in the instrument cluster will turn on solid. NOTE: If the transfer case is not in 4WD LOW range, the "Hill Descent Control Indicator Light" will flash for five seconds and HDC will not be enabled. Disabling HDC 1. Press the "Hill Descent" button or shift the transfer case out of 4WD LOW range. The "Hill Descent Control Indicator" light in the instrument cluster will turn off. Electronic Stability Program (ESP) This system enhances directional control and stability of the vehicle under various driving conditions. ESP corrects for over-steering and under-steering the vehicle by applying the brake of the appropriate wheel. Engine power may also be reduced to help the vehicle maintain the desired path. Hill Descent Button Enabling HDC 1. Shift the transfer case into 4WD LOW range. Refer to "Four-Wheel Drive Operation" in this section for transfer case operation information.