2009 Jeep Liberty Owner's Manual - Page 393

STARTING AND OPERATING 391 10. Repeat Steps 8 and 9 with the transmission in DRIVE. 11. Turn OFF the engine. 12. Turn the ignition switch to the unlocked OFF position. 13. Shift the transmission into PARK. 14. Attach the vehicle to a tow vehicle with a tow bar. 15. Disconnect the battery negative cable. NOTE: Steps 1 through 5 are requirements for shifting the transfer case. If these requirements are not met prior to depressing the NEUTRAL selection button or while the shift attempt is in process, then the NEUTRAL indicator light will flash continuously until all requirements are met or until the NEUTRAL button is released. The ignition switch must be in the ON position for a shift to take place and for the position indicator lights to be operable. If the ignition switch is not in the ON position, the shift will not take place and no position indicator lights will be on or flashing. Flashing NEUTRAL position indicator light indicates that shift requirements have not been met. CAUTION! Damage to the transmission may occur if the transmission is shifted into PARK with the transfer case in NEUTRAL and the engine RUNNING. With the transfer case in NEUTRAL, ensure that the engine is OFF prior to shifting the transmission into PARK. Shifting Out of NEUTRAL Perform the following procedure to prepare your vehicle for normal usage: 1. Bring the vehicle to a complete stop. 5