2010 Jeep Commander User Guide - Page 61
2010 Jeep Commander Manual
Page 61 highlights
MAINTAINING YOUR VEHICLE FLUIDS AND CAPACITIES Component Engine Coolant 3.7L without rear heat. Engine Coolant 3.7L with rear heat. Engine Coolant 5.7L without rear heat. Engine Coolant 5.7L with rear heat. Engine Oil with Filter 3.7L Engine Oil with Filter 5.7L Fuel Selection 5.7L Engine Oil Filter 3.7L, 5.7L Spark Plug 3.7L Spark Plug 5.7L Automatic Transmission Transfer Case (NV140 Single Speed Only. Transfer Case (NV245 Two Speed Only) Axle Differential (Front / Rear) Brake Master Cylinder Power Steering Reservoir Fluid, Lubricant, or Genuine Part MOPAR® Antifreeze/Coolant Five Year /100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. MOPAR® Antifreeze/Coolant Five Year /100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. MOPAR® Antifreeze/Coolant Five Year /100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. MOPAR® Antifreeze/Coolant Five Year /100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. API certified 5W-20 engine oil, Meeting the requirements of Chrysler Material Standard MS-6395. Refer to your oil filler cap for correct SAE grade. API certified 5W-20 engine oil, meeting the requirements of Chrysler Material Standard MS-6395. Refer to your oil filler cap for correct SAE grade. 87 Octane acceptable. 89 recommended for 5.7L. MOPAR® Engine Oil Filter or equivalent. ZFR6F-11G (Gap 0.043 in [1.09 mm]) LZFR5C-11G (Gap 0.043 in [1.09 mm]) MOPAR® ATF+4® Automatic Transmission Fluid or equivalent licensed ATF+4® product. MOPAR® ATF+4® Automatic Transmission Fluid or equivalent licensed ATF+4® product.. MOPAR® NV 247 / 245 Transfer Case Lubricant or equivalent. MOPAR® Synthetic Gear & Axle Lubricant SAE 75W-140 (API-GL5) or equivalent with Friction Modifier Additive. MOPAR® DOT 3 and SAE J1703 should be used or equivalent. If DOT 3 is not available, then DOT 4 is acceptable. Use only recommended brake fluids. This system requires the use of MOPAR® Hydraulic System Power Steering Fluid or equivalent, Which meets Chrysler Matreial Standard MS-10838. Capacities 12.7 Quarts (11.8 Liters) Includes heater and coolant recovery bottle filled to MAX level. 14 Quarts (13.2 Liters) Includes heater and coolant recovery bottle filled to MAX level. 15.2 Quarts (14.4 Liters) Includes heater and coolant recovery bottle filled to MAX level. 16.7 Quarts (15.8 Liters) Includes heater and coolant recovery bottle filled to MAX level. 5 Quarts (4.7 Liters) 7 Quarts (6.6 Liters) 21 Gallons (79 Liters - - 59
![](/manual_guide/autos/Jeep-2010-Commander-User-Guide-b95326/61.png)