2011 Jeep Compass Owner Manual - Page 196

194 UNDERSTANDING YOUR INSTRUMENT PANEL alert you to turn the signals off. If either indicator flashes If the ABS light is on, the brake system should be serviced at a rapid rate, check for a defective outside light bulb. as soon as possible to restore the benefits of Anti-Lock brakes. If the ABS light does not turn on when the 9. High Beam Indicator ignition switch is turned to the ON/RUN position, have This indicator shows that the high beam headthe light inspected by an authorized dealer. lights are on. Push the multifunction lever forward to switch the headlights to high beam, and pull toward 11. Seat Belt Reminder Light When the ignition switch is first turned to ON/ yourself (normal position) to return to low beam. RUN, this light will turn on for four to eight 10. Anti-Lock Brake (ABS) Light seconds as a bulb check. During the bulb check, if This light monitors the Anti-Lock Brake System the driver's seat belt is unbuckled, a chime will sound. (ABS). The light will turn on when the ignition After the bulb check or when driving, if the driver's seat switch is turned to the ON/RUN position and belt remains unbuckled, the Seat Belt Reminder Light may stay on for as long as four seconds. will illuminate and the chime will sound. Refer to If the ABS light remains on or turns on while driving, it "Occupant Restraints" in "Things To Know Before Startindicates that the Anti-Lock portion of the brake system ing Your Vehicle" for further information. is not functioning and that service is required. However, the conventional brake system will continue to operate normally if the BRAKE warning light is not on.