2011 Jeep Compass Owner Manual - Page 24

22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the NOTE: Pressing the LOCK button on the RKE transmitfollowing steps: ter while you are in the vehicle will activate the Vehicle Security Alarm. Opening a door with the Vehicle Security 1. Press the LOCK button on a programmed RKE transAlarm activated will cause the alarm to sound. Press the mitter for at least 4 seconds, but no longer than 10 secUNLOCK button to deactivate the Vehicle Security onds. Then, press the PANIC button while still holding Alarm. the LOCK button. Flash Lights With Remote Key Lock/Unlock 2. Release both buttons at the same time. This feature will cause the turn signal lights to flash when 3. Test the feature while outside of the vehicle by pressthe doors are locked or unlocked with the RKE transmiting the LOCK button on the RKE transmitter with the ter. This feature can be turned on or turned off. To change ignition switch in the LOCK position and the key rethe current setting, proceed as follows: moved. • For vehicles equipped with the EVIC, refer to "Elec4. Repeat these steps if you want to return this feature to tronic Vehicle Information Center (EVIC)/Personal its previous setting. Settings (Customer-Programmable Features)" in "Understanding Your Instrument Panel" for further information.