2011 Jeep Compass Owner Manual - Page 33

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 2. The transmission was in gear and the vehicle speed 2. Within 15 seconds, cycle the ignition switch between LOCK and ON/RUN and then back to LOCK five times returned to 0 mph (0 km/h). ending up in the ON/RUN position (do not start the 3. The transmission is in NEUTRAL or PARK. engine). 4. The driver's door is opened. 3. Within 30 seconds, press the power door UNLOCK switch to unlock the doors. 5. The doors were not previously unlocked. 4. A single chime will indicate the completion of the Automatic Unlock Doors On Exit Programming The Automatic Unlock Doors On Exit feature can be programming. enabled or disabled as follows: 5. Repeat these steps if you want to return this feature to • For vehicles equipped with the EVIC, refer to "Elec- its previous setting. tronic Vehicle Information Center (EVIC) - If NOTE: Equipped/Personal Settings (Customer• If you do not hear the chime it means that the system Programmable Features)" in "Understanding Your Indid not enter the programming mode and you will strument Panel" for further information. need to repeat the procedure. • For vehicles not equipped with the EVIC, perform the • Use the Automatic Unlock Doors On Exit feature in following procedure: accordance with local laws. 1. Close all doors and place the key in the ignition. 2