2011 Jeep Grand Cherokee Owner Manual - Page 167

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 System can be reactivated by pushing the Electronic To Set A Desired Speed Speed Control ON/OFF button and resetting the desired Turn the Electronic Speed Control ON. When the vehicle has reached the desired speed, press the SET (-) button vehicle set speed. and release. Release the accelerator and the vehicle will To Activate operate at the selected speed. Push the ON/OFF button. The Cruise Indicator Light in the instrument cluster will illuminate. To turn the system NOTE: The vehicle should be traveling at a steady speed off, push the ON/OFF button a second time. The Cruise and on level ground before pressing the SET button. Indicator Light will turn off. The system should be To Deactivate turned off when not in use. A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressure while slowing the WARNING! vehicle will deactivate Electronic Speed Control without Leaving the Electronic Speed Control system on erasing the set speed memory. Pressing the ON/OFF when not in use is dangerous. You could accidentally button or turning the ignition switch OFF erases the set set the system or cause it to go faster than you want. speed memory. You could lose control and have an accident. Always To Resume Speed leave the system OFF when you are not using it. To resume a previously set speed, push the RES (+) button and release. Resume can be used at any speed above 20 mph (32 km/h). 3