2011 Jeep Grand Cherokee Owner Manual - Page 68

66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The front passenger seat BeltAlert௡ is not active when the front passenger seat is unoccupied. BeltAlert௡ may be triggered when an animal or heavy object is on the front passenger seat or when the seat is folded flat (if equipped). It is recommended that pets be restrained in the rear seat in pet harnesses or pet carriers that are secured by seat belts, and cargo is properly stowed. 2. Turn the ignition key to the ACC or ON/RUN position (do not start the engine), and wait for the Seat Belt Reminder Light to turn off. 3. Within 60 seconds of starting the vehicle, unbuckle and then re-buckle the driver's seat belt at least three times within 10 seconds, ending with the seat belt buckled. BeltAlert௡ can be enabled or disabled by your authorized 4. Turn the ignition key to the OFF position. A single dealer or by following these steps: chime will sound to signify that you have successfully NOTE: The following steps must occur within the first completed the programming. 60 seconds of the ignition switch being turned to the NOTE: Watch for the Seat Belt Reminder Light to turn ON/RUN or START position. Chrysler Group LLC does on while the seat belt retracts and turn off while renot recommend deactivating BeltAlert௡. buckling the seat belt. 1. With all doors closed, and the ignition switch in any BeltAlert௡ can be reactivated by repeating this procedure. position except ON/RUN or START, buckle the driver's seatbelt.