2011 Jeep Grand Cherokee Owner Manual - Page 168

166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Vary The Speed Setting When the Electronic Speed Control is set, you can increase speed by pushing the RES (+) button. If the button is continually pressed, the set speed will continue to increase until the button is released, then the new set speed will be established. To Accelerate For Passing Press the accelerator as you would normally. When the pedal is released, the vehicle will return to the set speed. Using Electronic Speed Control On Hills The transmission may downshift on hills to maintain the vehicle set speed. Pressing the RES (+) button once will result in a 1 mph NOTE: The Electronic Speed Control system maintains (1.6 km/h) increase in set speed. Each subsequent tap of speed up and down hills. A slight speed change on the button results in an increase of 1 mph (1.6 km/h). moderate hills is normal. To decrease speed while the Electronic Speed Control is On steep hills, a greater speed loss or gain may occur so set, push the SET (-) button. If the button is continually it may be preferable to drive without Electronic Speed held in the SET (-) position, the set speed will continue to Control. decrease until the button is released. Release the button when the desired speed is reached, and the new set speed will be established. Pressing the SET (-) button once will result in a 1 mph (1.6 km/h) decrease in set speed. Each subsequent tap of the button results in a decrease of 1 mph (1.6 km/h).