2014 Jeep Grand Cherokee User Guide - Page 71

ELECTRONICS Equalizer, Balance And Fade 1. Press the SETTINGS hard-key on the right side of the unit. 2. Then scroll down and press the "Audio" soft-key to get to the Audio menu. 3. The Audio Menu shows the following options for you to customize your audio settings. Equalizer • Touch the "Equalizer" soft-key to adjust the Bass, Mid and Treble. Use the + or soft-key to adjust the equalizer to your desired settings. Press the "Back Arrow" soft-key when done. Balance/Fade • Touch the "Balance/Fade" soft-key to adjust the sound from the speakers. Use the arrow soft-key to adjust the sound level from the front and rear or right and left side speakers. Touch the Center "C" soft-key to reset the balance and fade to the factory setting. Press the "Back Arrow" arrow soft-key when done. Speed Adjusted Volume • Touch the "Speed Adjusted Volume" soft-key to select between OFF, 1, 2 or 3. This will decrease the radio volume relative to a decrease in vehicle speed. Press the "Back Arrow" soft-key when done. Loudness • Touch the "Loudness" soft-key to select the Loudness feature. When this feature is activated it improves sound quality at lower volumes. Surround Sound • Touch the "Surround Sound" soft-key, select On or Off followed by pressing the "Back Arrow" soft-key. When this feature is activated, it provides simulated surround sound mode. Radio Operation Seek Up/Down Buttons • Press to seek through radio stations in AM, FM or SXM bands. • Hold either button to bypass stations without stopping. Store Radio Presets • When you are receiving a station that you wish to commit into memory, press and hold the desired numbered soft-key for more than two seconds, or until you hear a confirmation beep. • The Radio stores up to 12 presets in each of the Radio modes. Four presets are visible at the top of the radio screen. Touching the "all" soft-key on the radio home screen will display all of the preset stations for that mode. 69