2015 Jeep Compass Owner Manual - Page 23

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 To Unlock The Doors And Liftgate Push and release the UNLOCK button on the RKE transmitter once to unlock the driver's door, or twice 1. Push and hold the LOCK button on a programmed within five seconds to unlock all doors and liftgate. The RKE transmitter for at least 4 seconds, but no longer turn signal lights will flash to acknowledge the unlock than 10 seconds. Then, push and hold the UNLOCK signal. The illuminated entry system will also turn on. button while still holding the LOCK button. Remote Key Unlock, Driver Door/All First Press 2. Release both buttons at the same time. This feature lets you program the system to unlock either 3. Test the feature while outside of the vehicle by pushthe driver's door or all doors on the first push of the ing the LOCK/UNLOCK buttons on the RKE transUNLOCK button on the RKE transmitter. To change the mitter with the ignition switch in the LOCK position current setting, proceed as follows: and the key removed. • For vehicles equipped with the Electronic Vehicle 4. Repeat these steps if you want to return this feature to Information Center (EVIC), refer to "Electronic Vehicle its previous setting. Information Center (EVIC)/Personal Settings (Customer-Programmable Features)" in "Understanding Your Instrument Panel" for further information. • For vehicles not equipped with the EVIC, perform the following steps: 2