2015 Jeep Compass Owner Manual - Page 34

32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Within 15 seconds, cycle the ignition switch between LOCK and ON/RUN and then back to LOCK four The auto door lock feature default condition is enabled. times ending up in the LOCK position (do not start the When enabled, the door locks will lock automatically engine). when the vehicle's speed exceeds 15 mph (24 km/h). 3. Within 30 seconds, push the power door LOCK switch Auto Lock Doors Programming to lock the doors. The Automatic Door Locks feature can be enabled or 4. A single chime will indicate the completion of the disabled as follows: programming. • For vehicles equipped with the Electronic Vehicle Information Center (EVIC), refer to "Electronic Vehicle 5. Repeat these steps if you want to return this feature to its previous setting. Information Center (EVIC) - If Equipped/Personal Settings (Customer Programmable Features)" in "Un- NOTE: derstanding Your Instrument Panel" for further infor• If you do not hear the chime it means that the system mation. did not enter the programming mode and you will • For vehicles not equipped with the EVIC, perform the need to repeat the procedure. following procedure: • Use the Automatic Door Lock feature in accordance 1. Close all doors and place the key in the ignition switch. with local laws. Auto Lock Doors - If Equipped