2015 Jeep Compass Owner Manual - Page 266

264 UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second station to each pushbutton by repeating the above procedure with this exception: Push the SET/RND button twice and SET 2 will show in the display window. Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM Push the rotary TUNE/SCROLL control knob again to and 12 FM stations to be stored into pushbutton memory. exit setting tone, balance, and fade. The stations stored in SET 2 memory can be selected by pushing the pushbutton twice. AM/FM Button Push the rotary TUNE/SCROLL control knob a fifth time and FADE will display. Turn the TUNE/SCROLL control knob to the left or right to adjust the sound level between the front and rear speakers. Push the buttons to select either AM or FM mode. SET/RND Button - To Set The Pushbutton Memory When you are receiving a station that you wish to commit to pushbutton memory, push the SET/RND button. The symbol SET 1 will now show in the display window. Select the button (1 to 6) you wish to lock onto this station and push and release that button. If a button is not selected within five seconds after pushing the SET/RND button, the station will continue to play but will not be stored into pushbutton memory. Every time a preset button is used, a corresponding button number will display. Buttons 1 - 6 These buttons tune the radio to the stations that you commit to pushbutton memory (12 AM and 12 FM stations). DISC Button Pushing the DISC button will allow you to switch from AM/FM modes to Disc modes.