2010 Kawasaki Vulcan 900 Classic Owners Manual - Page 119
2010 Kawasaki Vulcan 900 Classic Manual
Page 119 highlights
MAINTENANCE AND ADJUSTMENT 117 the fluid level in either reservoir is • If lower than the lower level line, check for fluid leaks in the brake lines, and fill the reservoir to the upper level line. Inside the front brake fluid reservoir is a stepped line showing the upper level line. For the rear reservoir, take off the bolt and remove the cover from the reservoir. WARNING Mixing brands and types of brake fluid can reduce the brake system's effectiveness and cause an accident resulting in injury or death. Do not mix two brands of brake fluid. Change the brake fluid in the brake line completely if the brake fluid must be refilled but the type and brand of the brake fluid that is already in the reservoir are unidentified. NOTE First, tighten until slight resistance is felt indicating that the cap is seated on the reservoir body; then, tighten the cap an additional 1/6 turn while holding the brake fluid reservoir body. A. Front Brake Fluid Reservoir B. Upper Level Line