2014 Kawasaki Brute Force 750 4x4i EPS Owners Manual - Page 139
2014 Kawasaki Brute Force 750 4x4i EPS Manual
Page 139 highlights
138 MAINTENANCE AND ADJUSTMENT WARNING HAZARD Cleaning the air cleaner element with gasoline or low flash-point solvent. WHAT CAN HAPPEN Gasoline or low flash-point solvents are extremely flammable and can be explosive under certain conditions. A fire or explosion can cause severe injury or death. HOW TO AVOID THE HAZARD Use a high flash-point solvent to clean the air cleaner element. Never use gasoline or low flash-point solvents. Clean the element in a well-ventilated area free from any source of flame or sparks; this includes any appliance with a pilot light. it dry in a clean towel. Do not wring the • Squeeze element or blow it dry; the element can be damthe element for damage. If it is torn, punc• Inspect tured, or hardened, replace it. aged. cleaning, saturate the element with a high • After -quality foam air filter oil, squeeze out the excess, then wrap it in a clean rag and squeeze it as dry as possible. Be careful not to tear the element. Install the air filter element to the element frame. Remove the vinyl from the intake tract. Install the element in the air cleaner housing to avoid the edges of the element from turning over. Clamp the air cleaner housing cap securely. j ○The element is sealed at its lower side by ribs in the air cleaner housing. The sealing efficiency of the element may deteriorate if the edges of the element are turned over during installation. NOTE ○Replace the element after cleaning it five times or if it is damaged. NOTE