2002 Lexus ES 300 Owners Manual - Page 37

KEYS AND DOORS Setting the functions 1. Close all the doors. 2. Turn the ignition switch to the "ON" position. 3. Within 10 seconds after the ignition switch is turned to the "ON" position; D To set function (a) Push and hold the front of the power door lock switch for 5 seconds with the selector lever in the "P" position. D To set function (b) Push and hold the rear of the power door lock switch for 5 seconds with the selector lever in the "P" position. D To set function (c) Push and hold the front of the power door lock switch for 5 seconds with the selector lever in any position except "P". D To set function (d) Push and hold the rear of the power door lock switch for 5 seconds with the selector lever in any position except "P". All the doors are automatically locked and unlocked when you release the power door lock switch. This indicates the function is set. If all the doors are not locked and unlocked, the time the switch was held may have been too short or too long. Repeat the procedure from step 1. If you want to cancel the function, perform the same procedure once again. Each time you perform the procedure, the function is set and cancelled alternately. " 1 Unlock 2 Lock Whenever small children are in the vehicle, lock the rear door so that it does not open from the inside. To do this, move the lever to the lock position as shown on the label next to the lever. Locking with rear door child−protector 23