2002 Lexus ES 300 Owners Manual - Page 83

INTERIOR EQUIPMENT GARAGE DOOR OPENER The garage door opener ( HomeLink R Universal Transceiver) is manufactured under license from HomeLinkR and can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, and security systems, etc. The battery side of the hand−held transmitter must be pointed away from the HomeLinkR during the programming process. For Canadian users, follow the procedure in "Programming an entrance gate/Programming all devices in the Canadian market". 1. Decide which of 3 HomeLinkR buttons you want to program. 2. Place your hand−held garage transmitter 25 to 75 mm (1 to 3 in.) away from the surface of the HomeLinkR. Keep the indicator light on the HomeLink R in view while programming. 3. Simultaneously press and hold the hand −held garage transmitter button along with the selected HomeLinkR button. 4. When the indicator light on the HomeLinkR changes from a slow to a rapid flash after 20 seconds, you can release both buttons. 5. Test the operation of the HomeLinkR by pressing the newly programmed button. If programming a garage door opener, check to see if the garage door opens and closes. (a) Programming the HomeLinkR " 1 Indicator light 2 Buttons The HomeLinkR in your vehicle has 3 buttons and you can store one program for each button. To ensure correct programming into the HomeLinkR, install a new battery in the hand−held transmitter prior to programming. 69