2002 Lexus ES 300 Owners Manual - Page 49

SWITCHES When the ignition switch is turned off with the wiper lever in the "AUTO" position, and then the ignition switch is turned on again, the automatic operation may not work even if raindrops are on the windshield. In this case, move the lever to another position and return it to the "AUTO" position again. To make the washer squirt, pull the lever toward you and release it. Also, the wipers will automatically operate a couple of times after the washer squirts even with the lever in the "OFF" position. The low washer fluid warning light in the instrument cluster comes on when the fluid level in the tank becomes nearly empty. For information on adding washer fluid, see "Adding washer fluid" on page 336. In cold weather, warm the windshield with the defroster before using the washer. This will help prevent icing, which could block your vision. CAUTION Be careful not to get your fingers caught between the wipers and windshield. When the wiper lever is in the "AUTO" position with the ignition switch on, the wipers could operate automatically in the following cases: D If you touch the upper center of the windshield adjacent to the sensor. D If you wipe the upper center of the windshield (adjacent to which the sensor is located) with a towel. D If the windshield vibrates. D If you touch the sensor. NOTICE Do not operate the wipers if the windshield is dry. It may scratch the glass. When waxing your vehicle, make sure that the washer nozzles do not become blocked. If a nozzle becomes blocked, contact your Lexus dealer to have the vehicle serviced. NOTICE Do not apply detergent to or wet the automatic wiper control sensor when cleaning the inside of the windshield. NOTICE If a nozzle becomes blocked, do not try to clear it with a pin or other object. The nozzle will be damaged. 35