2000 Lincoln Navigator Owner Guide 1st Printing - Page 215

Maintenance and care 5. Release clip and disconnect the electrical connector from the bulb socket. 6. Rotate the bulb socket counterclockwise and remove. 7. Pull the bulb straight out of the socket and push in the new bulb. 8. To complete installation of the parking lamp/turn signal assembly, follow the removal procedures in reverse order. Replacing foglamp bulbs The halogen bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the bulb carefully. Grasp the bulb only by its base. Avoid touching the glass envelope. 1. Rotate the foglamp bulb counterclockwise and remove from foglamp (the rear side of the foglamp is shown). 2. Disconnect the electrical connector from the foglamp bulb. 3. Connect the electrical connector to the new foglamp bulb. 4. Install the foglamp bulb in foglamp by rotating clockwise. 215