2012 Lincoln MKT Owner Guide 1st Printing - Page 159

Locks and Security 2. Press and hold the control button 1 for five seconds. A tone will be heard after about two seconds confirming memory position has been set. Continue to hold until a second tone is heard after five seconds. 3. Within three seconds press . the 4. Wait 10 seconds, then press . the 5. Repeat this procedure for memory 2 and another transmitter if desired. Deprogramming memory feature from transmitter To deactivate this feature: 1. Press and hold either the 1 or 2 control on the driver's door for five seconds. A tone will be heard after 11⁄2 seconds when the memory store is done, continue to hold until a second tone is heard after five seconds. 2. Within three seconds press the . 3. Repeat this procedure for another transmitter if desired. Replacing the battery The intelligent access key (IA key) uses one coin type three-volt lithium battery CR2032 or equivalent. To replace the battery: 1. Remove the backup key from the transmitter, then twist a thin coin in the slot hidden behind the backup key slot to remove the battery cover. Note: Do not wipe off any grease on the battery terminals or on the back surface of the circuit board. 159 2012 MKT (mkt) Owners Guide, 1st Printing USA (fus)