2015 Lincoln MKC Owner Manual Printing 2 - Page 218

Driving Aids Intensity: This setting affects the intensity of the steering wheel vibration used for the alert and alert + aid modes. This setting is not valid for the aid mode Low Medium High When you turn the system off, the lane marking graphics will not display. Note: If adaptive cruise control is enabled the overhead vehicle graphic may still be displayed. While the system is on, the color of the lane markings will change to indicate the system status. Gray: Indicates that the system is temporarily unable to provide a warning or intervention on the indicated side(s). This may be because E151660 • • System Display The road has no or poor lane markings in the camera field-of-view. The camera is obscured or unable to detect the lane markings due to environmental conditions (significant sun angles, shadows, snow, heavy rain, fog), traffic conditions (following a large vehicle that is blocking or shadowing the lane), or vehicle conditions (poor headlamp illumination). See Troubleshooting for additional information. Green: Indicates that the system is available or ready to provide a warning or intervention, on the indicated side(s). Yellow: Indicates that the system is providing or has just provided a lane keeping aid intervention. Red: Indicates that the system is providing or has just provided a lane keeping alert warning. You can temporarily disable the system at any time by doing the following: • • Quick braking. Fast acceleration. Your vehicle is under the activation speed. Your turn indicator is active. Your vehicle is in a dynamic maneuver. When you turn the system on, an overhead graphic of a vehicle with lane markings will display in the information display. If you turn the system on and select aid mode, arrows will display along with the lane markings. 215