2015 Lincoln MKC Owner Manual Printing 2 - Page 296

Maintenance 5. Install in the reverse order. Note: Make sure that the wiper blade locks into place. Replace wiper blades at least once per year for optimum performance. Poor wiper quality can be improved by cleaning the wiper blades and the windshield. E142592 Note: To see a clearer light pattern for adjusting, you may want to block the light from one headlamp while adjusting the other. 3. Switch on the low beam headlamps to light the wall or screen and open the hood. ADJUSTING THE HEADLAMPS Vertical Aim Adjustment The assembly plant properly aims the headlamps on your vehicle. If your vehicle has been in an accident, have the alignment of your headlamps checked by your authorized dealer. A B C D 8 feet (2.4 meters) Center height of lamp to ground 25 feet (7.6 meters) Horizontal reference line E142465 1. Park the vehicle directly in front of a wall or screen on a level surface, approximately 25 feet (7.6 meters) away. 2. Measure the height of the headlamp bulb center from the ground and mark an 8 foot (2.4 meter) horizontal reference line on the vertical wall or screen at this height. 4. On the wall or screen, you will observe a flat zone of high intensity light located at the top of the right hand portion of the beam pattern. If the top edge of the high intensity light zone is not at the horizontal reference line, you will need to adjust the headlamp. 293